X-Surf - Zorro - unable to open x-surf.device

[MikeB]

I having issues getting the x-surf card working, i have tried the testcard which detects fine.
But Miami is saying unable to open x-surf.device unit 0.

I have tried a different slot and also checked the envarc settings in sana2.

I running out of ideas ... HELP!!!!!!!!!!!!!!!!!!!!!!!

[MikeB]

yes i did.

i even tried genesis and that has the same problem.

[MikeB]

yes, i tried both Devs: and Devs:Networks

i also tried full duplex mode as well.

What machine you running your x-surf in?

[MikeB]

I have the z2-dp8390.mni driver, but im not using Miami deluxe just miami.

I have tried but does not work.
Strange thing is the TestCard shows the card, other config shows the card and the hub shows the ethernet communicating.
But Miami and Genesis dont seem to detect the x-surf.device.

[MikeB]

Yep checked that as well.

[MikeB]

>When you are in Miami and you 'query device', >does it allow you to?

Nope
> If not, then I'd guess the problem would be the >hard drive bitmap or something, likely not the x->surf.device.
How can the bitmap on the hard drive effect the ethernet card?

>Worst case scenario, use Disksalv or QB Tools to >fix the disk but try the reboot, the 'query device' >feature in Miami, and the MNI driver first before >doing Disksalv or similar.
I'm using PFS3 which has built in defrag and repair.

[MikeB]

The author is helping me with the x-surf, thanks for all your help guys.

Only sad thing is i managed to blow my prelude card, the x-surf clock port caused the problem.
My mistake ...

Erol