OK.. The WE3040 is a nice accellerator, it gave
my A3kd-030/25 a good boost in performance.
I also installed 2 32 meg chips, and the MoBo is
maxed out on ram. The machine will see all your
ram, I have a total of 80 megs fast ram.
You need to have the 040 lib in your lib dir.
Also required is 3.1 roms. (I think)
Jumper settings
J100 (quadclk) 3-4 (ext)
J102 (brdclk) 2-3 (int)
J103 (fpu) 1-2
J104 (cpu clk) 2-3 (ext)
J151 (rom spd) 1-2 (25m)
J152 (rom spd) 1-2 (25m)
J851 (cpu spd) 2-3
There isn't much to it, just plug it in and go.
I use the Warp SCSI for my internal drive and
the Native (A3000) SCSI for my external drive
box. They work well togather. The Warp SCSI
is much faster than the C= SCSI, you should
notice a difference.
When I installed mine .. there are a few brass
screw posts holding the MoBo in the case and
there are a couple of mounting screw holes in
the accellerator card. swaped around the posts
so I could hold the accellerator card down via
the mounting screw holes. If your machine runs
hot things can move around from the heat. Keep
the card locked in tight. I also have a small CPU
fan blowing across the heatsync, it may not be
necessary but I had it in there from my A3640
card and just left it in.
If you need more help feel free to EMail me
