I solved the problem with my GVP TechMagic card by
going to the local hardware store and buying a piece
of plexiglass long enough to cut a full lengh card out
of and cut it to mount in the last ISA slot. It will
mount 2 harddrives and does not block the Zorro slots.
I used the mounting bracket from an old junk PC card.
It works great.
Also any old ISA PC card (junk) thats big enough to
mount a drive will do if you just want one drive.
Just strip the contacts off the card where it slips
into the ISA card slot so its not making any citcuit
contact and that should work too.
Although I'm not sure if it would even matter if the
contacts were left on since the ISA slot shouldn't be
active unless a BridgeBoard was installed.
