I have an C= 2630 turbo card with 4 megs ram installed.
According to Amiga-Hardware 4 megs is the max ram on this
card ..the card has positions for up to 8 megs..(thats ODD)
Why put the positions on the card if you can't add the full
8 megs ram
:-?
I also have an A2091 SCSI card with 2 megs ram installed.
With both cards installed I only show a total of 4 megs
of Fast Ram (should be 6 megs). With just one of the cards
installed the ram shows correctly (either card).
It appears that the 2 megs on the SCSI card and 2 megs of
the ram on the turbo card have the same address so it only
show 2 megs instead of 4 megs. They don't seem to conflict.
It seems odd to me that Commodore would do something like
that. I would think with Auto-Config all ram should config
correctly.
