A2000 and HD 1.76 floppy drive

[melott]

Can someone tell me why a HD 1.76 floppy drive won't
work as DF1 ??
I have an DD 880 drive as DF0 and a HD 1.76 as DF1.
The HD 1.76 drive is not always reliable so I put
it at DF1.
I'm running OS 3.9 so I would think there would be
no problem. But it only see's DF1 as an DD 880 drive.
I guess I'm going to have to open the A2k up again
and move the HD drive back to DF0.

Anyone know why this is happening??

[melott]

IIRC my A3k just has jumpers on the drives.
I have HD drives at both DF0 and DF1, both are
reconzied as HD drives. (OS 3.9)
The A2k has a jumper on the MoBo to tell it there
is a DF1 on-board but I don't think there is any
jumper to tell it its a HD drive.
IIRC OS 3.1 on my A3k would only reconize one HD drive.
I had 2 HD drives in it then and only one would be
reconized at a time. If I had a HD disk in one drive
then the other would only see DD disks. But it didn't
seem to matter which drive on the A3k.
I didn't think it would matter on the A2k where the
drive is at, it does see it as a HD drive in the DF0
position.