Very strange video inputs on 1084s

[Sutty100]

I bought a replacement 1048s as my old one was on its last legs, colour was brighter on the right then the left which was starting to annoy me. Got a replacement which actually came with a commodore PC10-III which I didn't really want but it was the cheapest option on Ebay. PC10-III is actually quite cool but antiquated when compared to an Amiga, although I think they are from around the same year (A500 that is).

Anyway I've discovered the connections on the back are very strange and I guess designed for the PC10-III video out, which I have the cable for. CGA I think. The amiga monitor cable connects into the end on that cable which is supposed to go into the PC10 so I thought great just connect amiga monitor cable out to PC10 cable in and plug pc10 cable out into the monitor. No joy. So what are my options for best video quality from an Amiga 1200/600 into this monitor. Or should I abandon the plan and source another monitor...which I really don't have room for! Pic attached of the ports.

[Sutty100]

I did think it was best to use modern monitor but now I think the old games just look nicer on a CRT! Sort of blurs the jaggyness!

So which port would the 23pin cable signal ultimately end up going in? The TTL one or the other?

Why did commodore not change the model numbers! bah! but thanks for that link very handy!

[Sutty100]

So would this cable do the job?
http://www.ebay.co.uk/itm/Amiga-23pin-to-Microvitec-6-Din-plug-1-2-meters-NEW-EX-SHOP-STOCK-9-99-/121245741795?pt=UK_VintageComputing_RL&hash=item1c3acf32e3

[Sutty100]

It didn't fit very well and the image was all yellow! :-( dont think the pin layout was quite the same :-( I'm no good with a soldering iron, gone back to using the slightly dodgy monitor as brighter colours on one side is better then using composite cable into the "new" monitor as that isn't as sharp!