Welcome, Guest. Please login or register.

Author Topic: Amiga 500 Keyboard issues  (Read 2962 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Sutty100Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2011
  • Posts: 108
    • Show all replies
Amiga 500 Keyboard issues
« on: January 18, 2011, 12:31:21 PM »
I recently purchased my first Amiga an Amiga 500 of ebay. Everything works fine apart from the keyboard. It will let me type a few words and then stop working with the caps lock light blinking. Usually 3 times then stopping for a second and then repeating. Sometimes it blinks once. If I pick the machine up and tip it upside down it usually stops and the keyboard starts working. From this I thought perhaps a loose connection? Any thoughts? Also sometimes while typeing it will suddenly get stuck typing one key forever eg aaaaaaaaaaaaaaaaa and so on...
 

Offline Sutty100Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2011
  • Posts: 108
    • Show all replies
Re: Amiga 500 Keyboard issues
« Reply #1 on: January 18, 2011, 05:28:26 PM »
Thanks for the reply. :( Guess might have to try replacement keyboard.
 

Offline Sutty100Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2011
  • Posts: 108
    • Show all replies
Re: Amiga 500 Keyboard issues
« Reply #2 on: January 18, 2011, 06:56:15 PM »
Managed to get the seller to send me a replacement keyboard out in the post. How simple is it to replace a keyboard what are the steps involved? I have never even opened an Amiga up. Although I have changed hardware on PCs before so I am completely clueless!
 

Offline Sutty100Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2011
  • Posts: 108
    • Show all replies
Re: Amiga 500 Keyboard issues
« Reply #3 on: January 18, 2011, 07:09:50 PM »
Quote from: tone007;607480
Very simple once you get it open (5 screws or so,) the keyboard just sits there and there's one plug and maybe a ground strap to the floppy drive.  Note the colors on the cable though and make sure you plug the new one in the same way.


Thanks will give this a go when it arrives. Would I be correct in thinking its a 10mm Torx screwdriver I need?