Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: ATX Activation?  (Read 1946 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline N7VQM

  • Sr. Member
  • ****
  • Join Date: Dec 2002
  • Posts: 272
    • Show all replies
Re: ATX Activation?
« on: May 14, 2003, 06:54:45 PM »
To turn on an ATX power supply, jumper pin 13 (black wire) to pin 14 (green wire).  Look at this page for some pictures:

GideonTech

However, before you turn the PSU on, make sure it has a resistive load on each output!  You only need one per voltage.  If you don't put a load on it, you may damage the PSU.
Logged
\\"...an error of 1 is much less significant in counting the population of the Earth than in counting the occupants of a phone booth.\\" - Michael T. Heath, Scientific Computing...
 
Pages: [1]   Go Up
« previous next »