Welcome, Guest. Please login or register.

Author Topic: CD32 through WinUAE  (Read 3346 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Chunder

  • Full Member
  • ***
  • Join Date: Dec 2002
  • Posts: 148
    • Show all replies
Re: CD32 through WinUAE
« on: February 04, 2003, 02:31:16 PM »
Um - it took me all of two minutes! As soon as I found out that Cloanto had CD32 ROMs I had to go and buy them :)

In no particular order, then (since I'm at work, and can't check!) ...

Set up a new configuration, 2Mb chip ram and nothing else.

AGA chipset, KS3.1 CD32 ROM, CD32 expansion ROM (at least that's what I think it was called).

020EC processor, fastest speed maintaining timing, no hard drives, all floppies disabled.

Configure your input so that it is for a CD32 pad (i.e set up the buttons properly!) in port 2

Ensure that UAESCSI is enabled.

Set the display mode to 640x512 (note - you'll have to manually add this to the Windows registry! Not difficult; can't remember off-hand what I did though...) with full screen and full screen RTG. Ensure that scan lines are doubled.

Save.

Play games.

Cannon Fodder worked straight away (I've never been able to play the CD32 version) as did Roadkill, Myth, and a few others.

Bubba'n'Stix played the intro, then left me with a black screen and the music.

Overkill/Lunar-C loaded the title screen, but I couldn't select anything, nor move the cursor.

I'll try and post more info when I've got a bit more time...

HTH
Pimp My Amiga  8-)
___________________________
\\"The following statement is true.\\"
\\"The previous statement is a lie.\\"
 

Offline Chunder

  • Full Member
  • ***
  • Join Date: Dec 2002
  • Posts: 148
    • Show all replies
Re: CD32 through WinUAE
« Reply #1 on: February 04, 2003, 11:41:31 PM »
Run REGEDIT, and find the following key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\Display\0000\MODES\16

Within this folder (which corresponds to the 16bit modes), I created a new key called "640,512", and for the default value, I copied the data from the 640,480 folder.

This actually sets up a new display mode available to Windows (i.e. available from the screenmode control panel), and hence all applications - such as UAE.
Not quite as straightforward as CGXMode!

I've also just realised that I've got the CD drive mounted as a harddrive - volume name=CD0, pointing to D:\, and set to read/write (probably makes no difference, I suppose).

There are two rom files that you need to use:
ROM File = kick310-cd32.rom and
Extended ROM File = ext310-cd32.rom
Both of these are available from the AmigaForever plus pack thingy from Cloanto. Only cost a tenner, too! :)

Hope that this helps! If you still get stuck, drop me a note and I'll send you the configuration file...

I'm off to play Superfrog again - what a great game :)
Pimp My Amiga  8-)
___________________________
\\"The following statement is true.\\"
\\"The previous statement is a lie.\\"