Amiga 3000 Flashing Yellow Screen

[matt3k]

Having trouble with a 3000D.

It is giving a yellow flashing screen with about 7-8 flashing LED.

Here is what I have done so far:
1. Pulled all surface mounted chips and cleaned MB and reseated all chips.
2. Tried 3 different daughter boards (cleaned connectors on all boards).
3. Tried 3 different power supplies.

The motherboard is in perfect condition, I'm the original owner and replaced the batteries with zero damage.  Now it has a coin type.

System will reboot with a CTRL-A-A.

If I put an accelerator in it gives a black screen.


Any ideas?

[matt3k]

Check the crystal... my A3000 once did this.

The crystal had worked itself loose and was not making correct contact in its socket. Push on the crystal see if that works

Az

Great idea,

Although the crystal is soldered right to the MB.  Perhaps I will hit the solder...

[matt3k]

Update:

I removed the one meg of chip memory.

Tried different daughterboards.

Put different CIA's in.

Tried replacing the 3.1 roms with 2.04 ones.

Check the jumper settings.

Same results:

With an accelerator in, the LED goes through the normal startup - Dim to bright, and the system hangs at a black screen (Grey with 2.04 roms in). I can reboot with a CTRL-A-A.

With the stock 030, it gives the yellow flashing screen (Yellow than grey with a 2.04 rom). LED goes through normal startup and can CTRL-A-A to reboot.

Any ideas?