picoPSU-120

[TheGoose]

Ok, just about to get one of these, I know there have been some horror stories about these, true? Anyone using it? Caveats you might add? I am going to build an even smaller g1200 that should be pretty cool. Will be:

2"H 17"W 11"D

http://www.mini-box.com/s.nl/it.A/id.417/.f?sc=8&category=13

[TheGoose]

I can not find the thread here but someone blew up an a1200 with this. They were soldering to the MB I recall, so could have been user error...

I think it should work great with an adapter from amigakit.

Um looking closer I don't see it providing a -12v...

[TheGoose]

http://eab.abime.net/showthread.php?t=36569

might be a useful read.

thanks tone, All

Think I'm a go now with all this, it will work...

[TheGoose]

I should be safe, I won't be adding a PPC and a lot of stuff. My thought is to use less, low power stuff like CF card and DF0: terminator. Maybe an accelerator, but right now, it will just be an 020 A1200 with WB 3.1, super clean and quick.

Do plan on using the PCMCIA slot with a CF or SD adaptor for transfers.
Should be fun, getting one of these, with the switch...

http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=942

I will need to cut off the end and solder it to my MB - no connector on the board, just pins left, like in the pics above...