Welcome, Guest. Please login or register.

Author Topic: The Real HD-Fix  (Read 1922 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Amigo1Topic starter

  • Newbie
  • *
  • Join Date: Sep 2010
  • Posts: 13
    • Show all replies
The Real HD-Fix
« on: September 30, 2010, 10:02:12 AM »
Hello fellow Amigans,

I own a "The Real HD-Fix" floppy controller engeneered by T.Hirsch.

As can be read here on the bboah website, there appear to be 2 or more versions of this small board.
I happend to have the version which has a small chip clip which should be attached to the CIA located at U7 in A1200s. The plate is green instead of red, and it's the version for the A1200 made by Amiga Technologies.

Now, the bad part is, I accidentally breakaway the small cable off the chip clip and can't see on which pin it was connected.

Is there somebody out there who can provide a picture or tell me on which pin on the chip clip I have to solder the small wire?

Thanks in advance
 

Offline Amigo1Topic starter

  • Newbie
  • *
  • Join Date: Sep 2010
  • Posts: 13
    • Show all replies
Re: The Real HD-Fix
« Reply #1 on: September 30, 2010, 10:19:49 PM »
Thanx a lot!! :-))
 

Offline Amigo1Topic starter

  • Newbie
  • *
  • Join Date: Sep 2010
  • Posts: 13
    • Show all replies
Re: The Real HD-Fix
« Reply #2 on: October 06, 2010, 08:13:05 AM »
Thanks, but I need a HD-floppy. If I can't repair the one I mentioned before, I will come back to you..

greetings to spain! :-)