Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A4K New OS - Drivers etc  (Read 5494 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Karlos

  • Sockologist
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 16879
  • Country: gb
  • Thanked: 5 times
    • Show all replies
Re: A4K New OS - Drivers etc
« on: April 15, 2011, 11:04:34 PM »
The differences between 3.0 and 3.1 are small enough that you could probably just do a clean 3.1 install onto a separate partition then copy the files directly over the top your 3.0 (having backed it up first).
Logged
int p; // A
 

Offline Karlos

  • Sockologist
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 16879
  • Country: gb
  • Thanked: 5 times
    • Show all replies
Re: A4K New OS - Drivers etc
« Reply #1 on: April 15, 2011, 11:10:46 PM »
Quote from: LordSpunky;631898
That would be very handy, the previous owner had lots of bits and bobs setup that I don't want to loose.


If you do take this route, be sure to re-apply any changes to the S:startup-sequence and S:user-startup sequence files. As I say, back the working 3.0 partition up first.
Logged
int p; // A
 

Offline Karlos

  • Sockologist
  • Global Moderator
  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 16879
  • Country: gb
  • Thanked: 5 times
    • Show all replies
Re: A4K New OS - Drivers etc
« Reply #2 on: April 15, 2011, 11:22:58 PM »
You can certainly run Workbench 3.1 on Kickstart 3.0 (probably a few gotchas waiting in there for you in doing so), but I wouldn't recommend using Workbench 3.1 without Kickstart 3.1, especially if is needed to support a piece of hardware is said to require "3.1".
Logged
int p; // A
 
Pages: [1]   Go Up
« previous next »