Thanks for the reply !
Unfortunately, I don't have any other Amiga to test
Would something like IDEFix97 be helpful in that situation ? (even if it's only the software part)
I may have some 3.5'' drive I could test, but I'm not sure where to plug the power connector.
Do I have to use the floppy connector ?
Thanks
Is the drive already partitioned and formatted? If so, you could try mounting it on a PC running WinUAE.
As for the power, you probably will need to source it from the floppy port. This is less than ideal if your machine has other expansions too.
Back in the day when what is now my main 1200T was still in the desktop case, I fitted a male molex connector to the back of the case. I used an AT PSU that was connected to the normal A1200 power cable and then a second power cable from the same PSU plugged in via the molex. Internally, this molex connector was hooked up to the floppy, HD and a cooling fan. The motherboard, accelerator card and memory were drawing their power all from the original connector and I didn't want to put any further load on the motherboard.
