DENUB USB adding USB Classes

[Brosol]

I have one those blue USB NIC: KY-RS9600
Mine works using dm9601eth.class (DM9601 chipset)

[Brosol]

It depends on your setup....I've played with Genesis & MiamiDX but my router works best with Genesis using static IP & gateway address.

[Brosol]

From the Trident Classes>Select USB Class Library menu double click "dm9601eth.class" to add to the available USB Classes.....or if its still unsure you can add the the whole USB class directory via [dir scan button]

From the Trident Devices menu click [class scan button]...the NIC should show as green & running.

Save changes to PsdStackLoader file...take note of where it is saved.

Deneb must be flashed each time changes are made in Trident with the updated PsdStackLoader file.

The driver device is in resident memory.  I use the program Scout to show devices available.   For Genesis/Miami, the device name is: dm9601eth.device

[Brosol]

Well, as far as I can tell it is bound to the class.

But not sure if it's supposed to show a class or not.

Here is what it looks like unbound to a class.

http://gallery.me.com/trickyt#100036/usb1&bgcolor=black

I click class scan, now that I have dm6901eth.class loaded, it binds to it, then it looks like this.

http://gallery.me.com/trickyt#100036/usb2&bgcolor=black

Is it supposed to show a class?  Or does it look like this for everyone?  

I then can see on classes tab, it's bound to it.

http://gallery.me.com/trickyt#100036/usb3&bgcolor=black

But when I look at the details of the adapter, I see

http://gallery.me.com/trickyt#100036/USB4&bgcolor=black

>>> It seems to be normal for that model USB NIC I get the same Trident status messages.


And when it detects it and comes online, always get this error at bottom about no link, check plug.  But cable is fine.  However, no link light shows on the NIC or the hub.

http://gallery.me.com/trickyt#100036/USB&bgcolor=black

>>> This is not normal if the NIC is working and talking to your hub...router the NIC's status light should be on, flashing.  Do you have another computer to test the NIC?



I can't tell what I am doing wrong.   Do the class files and PsdStackLoader have to be loaded into flash?  They can't work loaded after the fact?  Maybe that's my problem.  

>>> Each time the PsdStackLoader file is updated it should be flashed to Deneb to reflect changes after a reboot


I manually added the device to the Genesis.conf file, like this

http://gallery.me.com/trickyt#100036/usb5&bgcolor=black

>>> I can logon to my router/PC windoze to check & test the status of the Amiga USB NIC connection.  Does your USB NIC work on another PC?


But not even sure if it's setup correct in Trident.  I can start GenesisRA and click online with the adapter, it says it's online, but I have no link light, nor can ping anything.    :angry:[/QUOTE]

[Brosol]

Glad you got it working.  I also use the Cisco-Linksys USB200M.
Some more useful info regarding USB compatible Deneb devices:

http://www.a1k.org/forum/showthread.php?t=11432

http://www.platon42.de/poseidon.html