JaXanim wrote:
@speel...etc
I've never flashed anything in my life, let alone my BIOS!
What the heck do I do?
I assume I download the fresh Flash to a floppy and run it from a DOS screen...?
Scarey stuff for an Amigan!
Cheers,
JaX
the flashing I did was really simple, actually:
gather all the information about the mobo, then search for the appropriate boot utility and especially, the appropriate bios binary. put it on a bootdisk (you can make a bootdisk under DOS with: sys A:, or: format A: /s)
start your computer with this bootdisk (make sure booting from floppy is enabled in your bios) start in the command line the utility with the bios binary filename as argument (like: flash bios.bin) and there you go! Make sure you have minimal software in memory, like cdrom drivers etc. to prevent locking up, and make sure you do not turn off your computer or anything else that interrupt the flashing process, otherwise the mobo will be destroyed)
oh, btw.
JaXanim wrote:
@speel...etc
cut 'n paste 'll do.
otherwise you can also say Eyso
:-)
