1084dS digital mode

[Speelgoedmannetje]

Sorry, this is not really Amiga, but I hope one of you guys can answer this. I want to connect my C= 128D to a C= 1084dS monitor, The pinout of the C=128D is this
and the pinout of the C= 1084dS monitor is this
When I use a simple gender changer, the output is garbled up. What do I need, or need to do to get the rgb signal of the C= 128D displayed on my 1084dS? Thanks in advance. :-)

[Speelgoedmannetje]

From this link I can make up the following:

ANALOGUE/TTL -- A switch used to alternate between an RGB analog and a Digital RGBI TTL type signal.

Now where's that switch? :-?

[Speelgoedmannetje]

On this monitor I see a switch on the left side of the rgb input of the monitor (from the viewers perspective). On mine, there is no such switch. Does this mean my 1084S isn't capable of displaying digital RGB?

[Speelgoedmannetje]

Well, my monitor has -except for that switch- exactly the same back as the one in the picture.

[Speelgoedmannetje]

Hm, I see 2 screws wich covers the back of the connectors, maybe if I screw open only that bit, I can make myself that switch. Sometimes such hardware is left out to reduce production costs. I've seen it more often.

[Speelgoedmannetje]

I opened my 1084S D2 monitor, but there aren't any traces of switches or something like that. So I guess there's no way to connect it via RGB. Alas.
(and btw, I can't yet pay internationally, so ebay would be difficult)