Convert ScanMagic to FlickerMagic

[b0ris747]

Can anyone confirm the RAM reference of the FF please?

I know the thread is old, but do I need a 518222 equivalent or a 518221 equivalent?

Was the convertion succesfull?

Thanks

[b0ris747]

@VingtTrois: Not this one, I'm looking for the RAM chips that are missing from scanmagic, and present on flickermagic.

@djkoelkast: http://a68k.de/techwb/filez/AMIGA/Geraete/DCE-Scanmagic_Adapterplatine.pdf

[b0ris747]

Real reference of the original chip is NEC UPD42280GU-30.


Not compatible with the oki one.
http://datasheet.seekic.com/PdfFile/UPD/UPD42280GU30.pdf
http://pdf1.alldatasheet.fr/datasheet-pdf/view/135080/OKI/MSM518222A-XXZS.html


I ordered some, I'll tell you if the conversion works.


I prepare a direct cable schematic for the ScanMagic from SM to VGA without twisted cable or interface.


I will post it here also.

[b0ris747]

Soldering RAM chips isn't enough to convert ScanMagic to FlickerMagic. It does not fix interlaced modes.

It was expected, but I had to try...

If anyone knows where to get the DCE FlickerMagic mach content....