50ns 32MB SIMMs.... where to find them?

[PaSha]

After overclocking my CS-PPC just a bit more (PPC@224 MHz, 060@64 MHz, the entire CS-PPC is running off a single 64 MHz oscillator) I'd like to get some new RAM, preferably 50ns SIMMs. Does anyone know where they can be bought for a reasonable amount of money?

Failing that, I'd go for some slim/low profile 60ns ones,
so any info about where these can be found is also appreciated.

They need to be slim in order to allow some more air to flow across the ram controller chips (I'll be installing some vertical SIMM sockets soon, so that I can stick some heatsinks on the 4 chips between the top and 2nd SIMM socket).

-Paul

A4000T (Escom), CS-PPC@224MHz/060@64MHz, 128 MB Fast, 18 GB UW-SCSI HD, 16x10x40x SCSI CD-RW, CV-PPC, AriadneII, DelfinaPlus

[PaSha]

Any single sided 32 MB SIMM will AFAIK be "half" a 64 MB SIMM, and with the CS-PPC not accepting anything bigger than 32 MB SIMMs, they won't work.

However, I know double-sided "normal" 32 MB SIMMs with "thin/slim" chips can be found (as in chips that are nearly flush with the SIMM PCB).

-Paul

[PaSha]

X-ray wrote:
@ PaSha

You've got balls of steel, resoldering those SIMM sockets. Respect, man. Let us know how it goes.

If I decide to resolder them, I'll either use proper gear (soldering station with suction pump to remove the old sockets) or have someone else do it...

Having vertical SIMM sockets give two advantages:
1: The possibility of using a socketed oscillator, for easier overclocking experimentation.
2: Increased airflow over the four ram controller IC's between the top and 2nd SIMM socket, and the possibility of installing heatsinks on these 4 IC's.

I'll let you know when I've done it, first I have to go buy the SIMM sockets...

-Paul