Tenacious wrote:
I have no experience with your EZ-towr, but it does seem that there used to be more to your system than is there now.
i think that too, but hardware wise, only about a mouse and a ide hard drive
The Squirrel SCSI plugs into your PCMCIA port? The HD and the CDrom are connected thru that? I don't remember if you can boot with Squirrel.
you cant which is why i need to get my ide cf adaptor back
3.0 Roms will work with OS 3.0 and 3.1. OS 3.5 and 3.9 require 3.1 roms.
yup, that is what puzzles me. i have a os3.9 disc, but 3.0 roms.
1200 MB requires +5, +12, -12 volts and ground (common return) to power up. These supply rails are included in your power supply. If you are good with electronics, no sweat. If not, getting any of these wrong will probably fry the MB.
its turned on, which is the 1st step
There is a 030 accelerator AND a 8Meg ram expansion w/68882 installed at the same time? How?
sorry for not being clear. i do have both, however the ram expander was in there, not the 030 accelerator.
Was the EZ tower normally supplied with an AT power conversion cable?
i think it was an optional extra
Detailed pics overall and up close (and in focus) will help others help you.
It does sound like a good find.
cant help with the pics, i have no camera at the moment. im now just researching about this 5pin din keyboard adaptor to see if this a3000 keyboard is actually working or not. i can not do a soft reboot from the insert disk screen.
