0 Members and 1 Guest are viewing this topic.
Been scouring the net looking for the strongest Peroxide cream I could find, everywhere I looked the max strength was 12% 40Vol stuff, then on eBay if found this stuff 18% 60Vol... Pro Cream Proxide 18% 60Vol 1Ltr
Best results I've found are for every 100ml or about 2.7Fl oz of creme peroxide you should add just under half a level teaspoon of Oxi powder, stir vigorously until you get a smooth mixture, leave for 5 minutes to froth up them stir vigorously once more before applying... Never had any bad results on any of the Amigas, Vic20s or C64s creme coloured plastics but you have to be a wee bit careful on the slightly darker/brown coloured plastics... I pry off all the keys before coating them as it's easy enough to do (just remember not to loose any of the springs underneath)... Also it's best to thoroughly clean anything your about to do beforehand to remove any oily fingerprint residue or just years of dirt & grime that you cant really see before coating. For this I use UPVC cleaner which removes all such dirt and grime first and produces the best results...
