Amiga 3000, Deneb and the different Busters

[strim]

Okay, after installing the MMULibs goodies, it appears PIO mode now works! I had to change the startup delay to 2000ms though. System still crashes however when Deneb is used in DMA mode. Almost there!

Hi! Any update on this? I've got the same issue here. PIO mode was also "fixed" for me by running MuForce prior to loading Workbench.

Do you know what causes this problem?

[strim]

You will get the MuForce output then in a sashimi window instead of SER:
Maybe this will give us some hint on what's going wrong.

I never managed to get any MuForce output. However I did get something after loading MuGuardianAngel, when trying to load Trident:

Task 07ffc790: Nearly out of stack. SP:07ffca6c LO:07ffc874 HI:07ffcd24.
PC  : 00fc2778  USP: 07ffca70 (F)( )  Name: RAM
Data: 00000028 00000000 ffffffff 00000000 40000000 80000000 00000000 00000028
Addr: 07ffc4bc 07fffd94 00000000 07fffd94 07ffc1d8 07ffcac0 SysBase  --------

Machine freezed after printing this. How can RAM be out of stack? :shocked:
Or maybe this is normal?

[strim]

Hi!

But I must stay in RESCUE mode!!!

I have similar problems. Did you try starting MuForce before Poseidon? It greatly improves stability in my A3000D.

Please have a look at:
http://aminet.net/package/util/libs/MMULib

I could not figure what goes wrong without MuForce, neverthless installing it fixed (most) crashes for me.