ATX PSU for A2000

[Buzzfuzz]

I have.
 

 
Thing you need is the backplate of a dead ATX psu and then use that as template for the holes you need to drill.
And if you use spacers between the case and psu, you should be good.
Or if your good with a dremel, you can make it fit, the problem is the AC line in connector sticks out by about 2mm's.
 

My A2000 power supply is dying, I plan on getting the ATX to A2000 MB cable adapter. and a Seasonic PSU. Has any one else put an ATX PSU in their A2000?

[Buzzfuzz]

I used the 4 that were under the second floppy drive, but their a bit longer, but rings also work, as long as you can get an m3 screw trough it :-D
 

OK thanks for that advice. I just happen to have a dead ATX PSU handy. What did you specifically use for spacers?