Welcome, Guest. Please login or register.

Author Topic: PT-1210 Mk1 Protracker Turntable Software for Amiga  (Read 9212 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline QuillOmega0

  • Newbie
  • *
  • Join Date: Apr 2010
  • Posts: 14
    • Show all replies
Re: PT-1210 Mk1 Protracker Turntable Software for Amiga
« on: April 22, 2014, 02:04:24 AM »
Can't get it to work on my Amiga 1200 with Blizzard 1260. Just locks up when I open it. Has ClassicWB on it if it matters.
 

Offline QuillOmega0

  • Newbie
  • *
  • Join Date: Apr 2010
  • Posts: 14
    • Show all replies
Re: PT-1210 Mk1 Protracker Turntable Software for Amiga
« Reply #1 on: April 22, 2014, 09:34:33 PM »
Booted from floppy, even with the Blizzard 1260 disabled it locks up. Used two different floppies same issue.

It is an NTSC Amiga so I'll try again with a switch to PAL.
 

Offline QuillOmega0

  • Newbie
  • *
  • Join Date: Apr 2010
  • Posts: 14
    • Show all replies
Re: PT-1210 Mk1 Protracker Turntable Software for Amiga
« Reply #2 on: April 23, 2014, 01:47:30 AM »
Yep that did the trick.

Switching the Amiga over to PAL mode allowed it to run without issue.
 

Offline QuillOmega0

  • Newbie
  • *
  • Join Date: Apr 2010
  • Posts: 14
    • Show all replies
Re: PT-1210 Mk1 Protracker Turntable Software for Amiga
« Reply #3 on: May 04, 2014, 06:20:57 AM »
Quote from: magnetic;763662
When you say "Swithcing over to PAL" how exactly do you mean? I selected PAL from early startup and boot from floppy no workee

Hold down both mouse buttons to go to Early Startup Control. Display Options, Set Display Type: PAL.

I left Chip Type at Best Available and this allowed me to run the software fine. An dno, it does not hold PAL mode, which means everytime you want to run the software, you'll need to switch it to PAL from the ESC.

And to assist in eventually debugging the NTSC issue, I should note that the problem seems to be reproducible in WinUAE as well.
« Last Edit: May 04, 2014, 06:25:33 AM by QuillOmega0 »