A4000 questions

[R2D2]

I recently bought myself an A4000 in ATEO-tower with Cybervision 64 3D. There seems to be 16Mb Fast on board and I was wondering is that the maximum or can I add some more? And then there is the battery.. Luckily it hasn't leaked yet. How can I remove it? What tools do I need? :-?

[R2D2]

There's 2Mb Chip & 16Mb Fast.

[R2D2]

Ok, thanks for the info. :-)

[R2D2]

Argh! Now I've got some serious problems.. Everything works fine with scandoubler, but when I try to use Cybervision nothing seems to work. The bootlogo looks good but when Workbench screen appears everything is messy and mixed up. And finally it crashes.. This happens every time.. Could anybody help? I'm becoming desperate.. :-(

[R2D2]

You can try P96 as I have heard some people have better luck with it.

I've tried with both P96 & Cybergrafix but no luck..

[R2D2]

So, i suggest you to post here your full config (hardware/software).

So here's my config:
* A4000 030/25MHz in ATEO tower
* 2Mb Chip + 16Mb Fast
* 250Mb 3,5" Seagate
* 40x CDROM
* 3,5" diskdrive
* 3.1 Rom
* Cybervision 64 3D
* Scandoubler
* Samsung 753s 17" monitor
* OS 3.5

Scandoubler works fine but CV64 3D doesn't.. I've tried everything I can possibly imagine but the CV just doesn't work.. I'm desperate.. :boohoo:

[R2D2]

a jumper is mis-set on your CV64/3D.

A jumper? What jumper? I don't know anything about them since I don't have any instruction sheets..

[R2D2]

Okay I'll do that. Just not right now since I'm too drunk.. :-)

[R2D2]

Instant Remedy rules! At least when I'm this drunk.  :-D