Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: AT Power Supply Question for A1200  (Read 2586 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Homer

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1166
    • Show all replies
    • http://www.graingerweb.net
Re: AT Power Supply Question for A1200
« on: July 30, 2008, 06:24:22 PM »
This doesn't sound right. The AT psu usually has a toggle switch in the mains power feed, while an ATX doesn't, and is turned on by the motherboard connecting (psu colours) green to black from the low voltage "momentary" switch on the front of the case.
Are you sure its an AT psu ?
Logged
Let X = X
{(c) Laurie Anderson}
 

Offline Homer

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1166
    • Show all replies
    • http://www.graingerweb.net
Re: AT Power Supply Question for A1200
« Reply #1 on: July 31, 2008, 10:03:19 PM »
Without seeing the psu I don't want to advise in case you connect it incorrectly ! What you say sounds OK, but if you are not sure, please contact a competant technical person  :-o
Logged
Let X = X
{(c) Laurie Anderson}
 
Pages: [1]   Go Up
« previous next »