Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: HD won't show up when used with a buffered IDE interface  (Read 3677 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Homer

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1166
    • Show all replies
    • http://www.graingerweb.net
Re: HD won't show up when used with a buffered IDE interface
« on: July 14, 2006, 04:22:48 PM »
What jumper options do you have on the hard drive ? There may be a different combination that will work ? Oh and have a :pint: when you look at it, it will help dampen down your electrostatic discharge capabilities (hic)
Logged
Let X = X
{(c) Laurie Anderson}
 

Offline Homer

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1166
    • Show all replies
    • http://www.graingerweb.net
Re: HD won't show up when used with a buffered IDE interface
« Reply #1 on: July 14, 2006, 08:32:19 PM »
But what other options are there ? Is there a sticker on it ?? Some 2.5" HD's are a bit temperamental with these settings, so its worth having a look. Master with Slave ? Master alone ? anything like that ? Maybe another :pint: ? Good luck :-)
Logged
Let X = X
{(c) Laurie Anderson}
 

Offline Homer

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1166
    • Show all replies
    • http://www.graingerweb.net
Re: HD won't show up when used with a buffered IDE interface
« Reply #2 on: July 15, 2006, 11:13:41 AM »
Maybe take the feed from a spare PC ? Most of us have a few of those things hanging around  :-o It would be good enough for testing anyway :pint:
Logged
Let X = X
{(c) Laurie Anderson}
 
Pages: [1]   Go Up
« previous next »