Well, I did all the fixes on my 2B board tonight..
A little tip for adding the 470R pull up by the ROMs..
I found it #@~ing impossible to solder the other end of the resistor to the via on the board.
I simply used a thin piece of insulated wire, and soldered it to the bottom side of the +5V on the floppy power connector, and then soldered that to the resistor.
There`s probably a much easier and neater way, but I went for the quick fix !
Edit.. Sorry, I`m speaking outta my arse..I didn`t read Ian`s site properly :roll:
Don`t bother doing what I just described, it doesn`t do anything.. as the connection at the cap near the ROM is the +5v...silly me, I thought it was the trace I needed from Alice .
