Welcome, Guest. Please login or register.

Author Topic: hi l went mad and brought a 1.3 wb ami 2000 need help  (Read 1831 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Jope

Re: hi l went mad and brought a 1.3 wb ami 2000 need help
« on: November 11, 2007, 10:42:26 AM »
Quote

actung_bab wrote:
whould it pay for me to check the battery for leakage

It would be a good idea.

Quote
l have brought a 2091 scsi hard drive controller whould this have exta ram on board.

It is possible that it has either 512kB, 1MB or 2MB or RAM on board. You can determine this by looking at the card once you get it. 4 chips per 512kB. There's also a jumper next to the RAM that has the sizes printed next to each setting.

Quote
also what is the best way to upgrade the rom from 1.3

1) open case
2) determine version of motherboard, if German 4.x then solder a wire onto your 2.04/3.1 rom chip between pins 1 and 31. If American 4.x or better, no wire needed on the chip.
3) swap rom chips
4) close case

Quote
l have spare amiga 1200 3.0 roms but these whouldint work with the 2000

True.

Quote
is there any graphics cards available for

the 2000

Yes, several.

http://amigahardware.mariomisic.de/cgi-bin/showcat_en.cgi?CATID=16

All of the Zorro II compatible cards will work.

You will need at least an 030 processor in order to be able to use a graphics card.
 

Offline Jope

Re: hi l went mad and brought a 1.3 wb ami 2000 need help
« Reply #1 on: November 11, 2007, 10:46:39 AM »
Quote

countzero wrote:
any volunteers for translation ?


Sentences begin with a capital letter, and there is no space in front of punctuation.

Now this thread contains two postings that don't help the OP in any way, but merely make us two look anal-retentive. :-)
 

Offline Jope

Re: hi l went mad and brought a 1.3 wb ami 2000 need help
« Reply #2 on: November 12, 2007, 07:34:26 AM »
Quote

A4000_Mad wrote:
Correct me if I'm wrong, but aren't you the bloke that invented Tipex?

I at least answered to the OP. ;-)