Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Does anybody know how to install this?  (Read 1491 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline filson

  • Full Member
  • ***
  • Join Date: Sep 2002
  • Posts: 162
    • Show all replies
Re: Does anybody know how to install this?
« on: March 16, 2005, 09:32:54 AM »
It looks like you have to pull a 2.5 inch IDE cable from the A1200 controller to the lone 2.5 inch IDE slot on the lower part of the bus board.

You then have an optional 2.5 IDE port as well as the 3.5 inch ports.
Logged
My name is Filson. I solve problems.
 

Offline filson

  • Full Member
  • ***
  • Join Date: Sep 2002
  • Posts: 162
    • Show all replies
Re: Does anybody know how to install this?
« Reply #1 on: March 16, 2005, 09:47:10 AM »
Yes, 1 indicates the first pin on the slot or the red wire on a IDE cable.

Yes, you have the option to use either a 2.5 inch drive on the second 2.5 slot OR a 3.5 inch drive.
First slot is 3.5 inch only.

You might be strapped down by the "low" transfer speeds of the A1200 onboard IDE controller, so dont expect the wild thing :)
Nice little board, tho.
Logged
My name is Filson. I solve problems.
 
Pages: [1]   Go Up
« previous next »