scala mm400 dont exit!!!

[jackiabu]

HI
 
i just instal scala mm400 on my amiga,the problem is that when i load script from scala and i want to exit (need to press esc or mouse) its stuck!
i have this problem years ago i dont remember what i do to slove this problem,but i do remember that the problem is belong to the CyberGraphX V3 config?!

any ide please:angry:

my system is: a4000t,cyberstrom mk1 060,cybervison 64(not 3d)

[jackiabu]

1. Are you running scala on your AGA chipset or your gfx card?
 
2. Never ever use Cybergraphx v3. It is totally bugridden.

hi
 
i use gfx card now and before. as i say before i solve the problem in gfx mode along time ago, but i dont  remember i do! and i wad use scala in gfx mode.

[jackiabu]

@Jack
 
SCALA MM400 is an AmigaOS program. I am afraid it wasn't really designed with CybergraphxOS in mind.
 
You can guaranteed run SCALA on your hardware if you remove the cgfx driver from DEVS:Monitors/
Just put it somewhere else so you can bring it back later if you want.
 
That is what I have done a zillion times in order to run normal Amiga AGA software. It will work.
 
There may be other ways of making it work but I donno...

HI
 
well  you right, but ten years ago i still have the same system as now,
and i run scala in rtg mode! i know its somthing in the pre install Cybergraphx3. when the instal start its began the dumb question like: 15bit yes/no ,hiresscrs yes/no , etc. but again i downt remember what i do in the pre install:hammer:

[jackiabu]

Ahhh yes I remember the other trick now!
 
There is a terrible bug in all versions of Picasso96OS and CybergrafxOS that I have ever tested. You can't reliably run AmigaOS software that opens an AmigaOS screen while any P96 or CGX screen is already open.
 
You can change your workbench to an AGA mode then run SCALA and it might work.
 
Make sure you have no CGX screens open for this trick to work. No web browser, no text editor, etc.

hi
 
no i'am sorry to tell you that there is the regular way to load scala and play script whit out any bug! but this is not what you and all the guys here tell me. again-its smothing that you shuold do before you insatll the cgx. i mean in when the install begain! :confused:

[jackiabu]

If you are using the same Amiga that you used last time then wouldn't all the settings already be set correctly?

 
NO i format the hd.