How to automount HDs with Cyberstorm

[chusete]

Hello amigans...

I haven't experience with SCSI.

I have a CyberStorm 060/PPC and I want to install a SCSI HD.

Using "Unit Control" (a Phase5 soft) I can see the HD:

Board 0 Unit 15 Lun 0 ST380013 3AS 8.12

With the software SCSICONFIG, I can create partitions, set the boot partiton, etc ...   I can't see the SCSI HD with hdtoolbox.

The problem is:  Now I must boot the amiga with an IDE HD, then use Unit Control and mount the SCSI HD manually.

I want to boot from the SCSI HD.  What I'm doing wrong?

Thank you

[chusete]

In the CyberStorm's boot menu I can select the unit 15, but not the LUN0, the options are:  NO-LUNs , LUN1, LUN2... etc and my HD is LUN0.

I'll try with cybppc.device in HDTOOLBOX.

[chusete]

It works!

Now is set as Unit 6 - LUN 1...   the real LUN is 0, but setting it as LUN 1 in the boot menu, works.

What a difference!  now my Amiga flies!

Thank you Tension