Help installing DENEB card in A3000 desktop

[Kawazu]

All the software that you need is already on the deneb card, you just have to change a jumper on the card and there will popup a new icon on your desctop just open that up and all you need is inside.

Just remember to remove the jumper when you have taken all the files out.
(do NOT change the jumpers when the amiga is ON)

I have marked this photo so you can see where to put the jumper, the top marking is just to show what you are marking for



And this is how you place it inside of your amiga

[Kawazu]

A jumper is a smal plastik squar that have some small metal pices inside.

The jumpers job is to connect two points together, like the points i marked. You have a top row of pins and a bottomrow, you just place the jumper on top of the pins so it connects the top with the bottom.

Somthing like this.

[Kawazu]

The other picture i posted that i marked in the lower corner.
Now compare that old picture to this.



At the point i marked they have placed a jumper on top of those two pins, its not hard, you have two holes and two pins that goes into them you cant do it wrong as long as you place them on the two pints i have marked.

[Kawazu]

More pics on jumpers so you get a hang of it

[Kawazu]

Can you show me or point to me where to put the jumper? Thanks

On the first picture i posted i marked the first two pins that needs connection in for the first run so you can get the software out of the card.

On the second picture of the deneb card you can see that they have placed a jumper on the exact same spot that i marked with a red sqauar so there is where you want to place it.

[Kawazu]

Exactly, the jumper is placed to the far right when you have placed the card in the zorro slot on top of the pins, the pins will be inserted into the jumper.

[Kawazu]

This is what you need.
http://aminet.net/util/libs/mui38usr.lha