One of my Deneb USB ports not working

[mousehouse]

Hi all,

I just got my second Deneb card and installed it into my A4000D. Now, the middle USB port (the one closest to the physical internal USB port) doesn't work. I have already tried to swap the leads with the other port, the lead is fine, just the port won't do anything.

Poseidon, Trident, etc. they all show everything OK.

Any tips and things to check before I start suspecting the hardware is broken?

[mousehouse]

I got a second Deneb for my second Amiga ;-)

Just to make sure the second Amiga is not b0rked I unplugged the Deneb from my 'working' Amiga and put the new Deneb in. Flashed the Poseidon config / setup and it should be an identical setup.

Thanks for the tips, I'll get in touch with the store to see if they can do anything for me...

[mousehouse]

It's such a common problem; Michael should have used a single, keyed header for both ports. Keyless Zorro slots don't help either....

Does the warranty cover it? I think there's at least two warnings in the manual.

Don't know if the warranty covers it, I assume not. I'm quite certain that I took every reasonable precaution on the installation but I will never know if it came with a defective port or if it was because of my doing.

Even though I should be happy the other port works it still sucks.