Hi
My system is configured as follows:
A4000 / CybervisionPPC / Indivision AGA
I had the system connected to my 24" DELL 2405FPW LCD monitor and all was working fine (using a KVM to switch input signals to the monitor between the CVPPC when in WB and the Indivision when playing a game).
Last week I picked up a 32" Samsung HD LED TV and connected it to the Amiga. I got a picture fine through the CVPPC but nothing when outputting through the Indivision (the TV says 'Signal Out Of Range').
So..I thought no problem I'll fire up the Indivision Config tool (had not had to do this when connecting to the DELL LCD). I changed the PAL settings (I'm assuming NTSC and the other one (forget the name) are of no consequence to me??) to match the specs in the Samsung manual but still no image. The jumper on my 4000 mobo is set to PAL.
To 'test' the setting I do this in Workbench. With the Amiga running just WB (no games etc) the Indivision on the DELL LCD was displaying a blank screen (but coloured the same as my WB background colour)..on the Samsung LED the signal is apparently out of range. I'm assuming I'll know I've got the setting correct when I get the Samsung to show the same image as the DELL.
So...I'm wondering if someone would be so kind as to give me a quick rundown on how to use the Indivision Config tool (so I know I'm doing the right thing)? I've played around with the Scanmode setting and the vertical/horizontal frequencies but nothing much appears to be happening. Do I need to reboot the Amiga in between setting changes?
Any help appreciated!
Thanks
