Apollo 1240 battery & fan questions.

[stachu100]

Look here:
http://picasaweb.google.com/stacho100/Apollo126006080MHz32MBRAM#
I'm using Panasonic VL2020 accumulator. This accumulator is really very nice - it will not leak and it will be re-charged during normal Amiga operation.

[stachu100]

First answer: this small board is 3,3V regulator necessary for 060 CPU
Second answer: no, this heatsink+fan is not form laptop, but you can use any fan to cool down CPU. Your imagination is only limitation here. ;-)

[stachu100]

That's depend on fan you are going to use.
You can connect fan to +12V, +5V or +3,3V.
Last solution is not recommended, but technically possible.

[stachu100]

I don't think I was clear enough with what I meant
 
On the Apollo card the wires from the fan are soldered to some solder pads, how many volts are output from these pads?

You can always check this by using multimeter, but it's 12V (12V is also written on PCB, please look closer).