Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Indivision 1200 AGA MK2cr DVI bracket  (Read 4536 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Indivision 1200 AGA MK2cr DVI bracket
« on: April 19, 2015, 11:13:04 PM »
For those of you with Indivision 1200 AGA MK2cr, how are you mounting it to the case?  Mine has the bulky blue DVI connector.  I purchased one of those plastic DVI back plates from amigakit and I ended up breaking it because the screw holes do not line up.  I had to buy another one and have the same problem.  I tried widening the holes with a screw, but no luck.  I'm tempted to heat up a nail and melt the holes wider.

Thanks
Logged
 

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Re: Indivision 1200 AGA MK2cr DVI bracket
« Reply #1 on: April 20, 2015, 02:27:14 AM »
Post reported.
Logged
 

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Re: Indivision 1200 AGA MK2cr DVI bracket
« Reply #2 on: April 20, 2015, 03:28:03 AM »
Wow....as someone who has actually been to the doctor in the past for eczema, I didn't find it funny.  By the way...the tiny scab on my thumb is not eczema.  It's the result of scraping my thumb against a piece of metal.  Judging by your attitudes I guess it would be ok for me to insult forum members because of their physical appearance in the future.
Logged
 

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Re: Indivision 1200 AGA MK2cr DVI bracket
« Reply #3 on: April 20, 2015, 04:58:37 AM »
Stick to neonatology.
Logged
 

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Re: Indivision 1200 AGA MK2cr DVI bracket
« Reply #4 on: April 20, 2015, 07:02:25 AM »
This is what I sent him.  I don't think it's too much to ask.

This ends now.  From what I understand, this forum is not about spam or  solicitation.  You, as a doctor, should respect confidentiality.  If you  mention my hands or skin again, I will contact the medical center you  work at in Guam and let them know you have been giving unsolicited  medical advise on a hobby/computer forum.  Do you enjoy shaming people?   I have copied and pasted your comments into a text document.  Enough is  enough.
Logged
 

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Re: Indivision 1200 AGA MK2cr DVI bracket
« Reply #5 on: April 20, 2015, 05:27:13 PM »
I tried flipping it the other day and the holes still don't line up.  I didn't want to post 2 pictures.  I'm starting to think either the screw holes on my port were not drilled in the right spots or my port was somehow molded much thicker.  It looks to be bulkier than the pic used on amigakits' website.  Thank you all for making me out to be a troll.  I was under the impression you "Blue State" guys are much more compassionate and tolerant.
Logged
 

Offline sjprohaskaTopic starter

  • Newbie
  • *
  • Join Date: Aug 2009
  • Posts: 43
    • Show all replies
Re: Indivision 1200 AGA MK2cr DVI bracket
« Reply #6 on: April 20, 2015, 06:36:14 PM »
I could, but I don't think I should have to sand it down.  I think Individual Computers should have better quality control and make sure the parts they pick have some consistency.
Logged
 
Pages: [1]   Go Up
« previous next »