Fastlane, A3KT and A3640 problem.

[Crusher]

I have two FastLaneZ3 and none of them want to work with my A3KT. The Amiga doesn´t even boot into early startup so I can´t see what´s wrong. I know they work though and I have the manual.
Anyone with an idea?  :-)

[Crusher]

Yes, it has all the new chip in it.  :-)

(It doesn´t require vers 11 only 09 according to the manual.)

[Crusher]

Ehm.. yes I have all the new chip in it.  :-)

[Crusher]

That is what I suspect, but according to the manual the problem is on the A4K (although it doesn´t say anything about the problem on an A3K) but on the A3K you only need a Buster 09 or pref. Buster 11.

But where should that FCT240 be on an A3K then?  :-)

[Crusher]

If you haven´t changed the 74FCT244 to the supplied 74FCT240 clock driver chip then you´ll bound to have problems. It´s a DIL module located on the motherboard marked U103. All according to the manual.  :-)
Although they are talking about the A3640 ver. 3.0 but it might be the same with 3.1.

[Crusher]

@T3000, Sounds good I´ll try that.

Although I have now tested the card in my A3KD with stock 030 and it worked fine there but I only get the mem to work. When I try to do anything with the scsi then my Amiga won´t start.  :-)