Error 228 in HDToolbox?

[Crusher]

I'm trying to get HDToolbox to recognize a couple of IBM 0662, 1GB SCSI harddisks. Everyone reads the same configs and they should be 1052MB or so, instead HDToolbox recognize them as 830MB and gives me a requester that says: "Error 228 in drive description".
Any suggestions? :-)

[Crusher]

Hmm.. ok, next problem... getting a PC with SCSI :-D

They where installed in an IBM AS400 before so...

[Crusher]

Yeah, that is solved though. My friend gave me a scsi-card, Adaptec AHA-2940U S1(should be nice with drivers for Amiga) so I'm going to test it when I have the time(that is, when my girlfriend give me permission to dig into her PC) :-)

I always test harddisks seperately when "debugging".
My scsi-chain is: Amiga(terminated)--DH0--Empty--CDrom(terminated). I guess it's right :-)

Raid, yes. The AS400 were a mailserver on a major coffee company(Gevalia) here in my town. The AS400(with new harddisks) is rescued too, but it's kinda hard to config. I'll get into it when the knowledge is high enough.

@blobrana: I don't like to test another HDToolbox besides the one that is in the AOS, that's because I have bad experiences with other than stock AOS. :-)

[Crusher]

@scholle: In the middle? With a SCSI2 controller? Ok, never thought about it 'cause it has it's own terminators. But I'll test it. :-)

@X-ray, I'll think about it. Thanks for the offer.