I used to have a towered A1200 with Z4 board and CV64/3D but that A1200 gave up on me so I disassembled as much as I could. Now I have bought another towered A1200 with a megacool PPC 233 Mhz/68060 and a Bvision. Two hd's were connected to the internal port, so the first thing I did was to get me a Z4 Powerflyer from Elbox and mounted it in the (Elbox) tower. Problem : after turning the thing on it didn't recognize anything and got the bootlogo. So I tried my own (old) 20 Gb hd with the 68030 stuff on. It worked. Cool. But now I still can't use those other hd's, certainly not the one with the boot partition on. So now I'm stuck with my old hd. The good thing is that I mounted my CV64/3D again because I don't know how to mount the software for the Bvision. I have a Cybergrafix V4 cd here but they don't seem to support this card. For the moment I can help myself pretty well because the CV64/3D is connected to a 19" monitor, but still I wanna get that other gfx card to work. Hope to get 3 monitors connected to the same computer, standard AGA + CV64/3D + Bvision. But, can this work together ?? I read somewhere that a Z2 busboard can only handle a maximum of 8 Mb, so two big gfx cards won't work together and one will then disappear and won't be noticed by the system. But I have seen that the Bvision is not connected to the Zorro busboard, so that rule doesn't count, does it ? :-?
