If you have a running system the first thing I would get is another HD and make a backup of your Workbench. Make two partitions, one for WB and one for Data. Then I would boot off the new HD and ADF all your disks to the Data partition. Once you are done, you can transfer them to the PC as recommended (format a drive in DOS and mount it, but that would be hard for a n00b) or you can sneakenet it and you can transfer one disk image at a time by first Zipping the ADF (making a zip file less than 720k) then copy the Zipped image to a 720k PC disk and thus making the PC able to read that disk! This would take a long time though! Or if you can get a null modem cable to the PC that is another option. Another one is to get a Zip drive or such and mount a PC formatted zip disk and go that route. Check Aminet for DOS drivers for a Zip drive! Good luck! You have some retro fun ahead of ya!!!
