Welcome, Guest. Please login or register.

Author Topic: Got my Deneb...some questions  (Read 2077 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mboehmer_e3b

  • Sr. Member
  • ****
  • Join Date: Aug 2002
  • Posts: 312
    • Show all replies
    • http://www.e3b.de/usb/
Re: Got my Deneb...some questions
« on: September 15, 2008, 03:56:41 PM »
Quote

Picasso IV Graphics card


Which version of firmware do you use in the PIV?
Please use the P4Info program to check.

Quote

However, after using the card for a few minutes surfing websites with IBrowse or Aweb, I get a recoverable alert, and then a red Software Error 8000000B.  I am using the Deneb PIO mode (that is what is in the flashrom) as this is an A4000T and I know DMA doesn't work with it because of the limited buster rev.11.


Fine, PIO is the correct decision here.
Two things you might check now:

a) Install Scout, and in case of the recoverable alert try to find out which task is the bad guy.

b) Set the Zorro II jumper on the DENEB, use the correct Zorro II USB driver in Poseidon and check if you still get the alert/GURU.

By this you could help us determining the real cause of the guru.

Please send the information also to mboehmere3bde.

Thanks in advance, Michael