I am assuming you have a TCP/IP stack like Miami
or Genesis running? Either will work. Always
try running your TCP/IP stack to set parameters
automaticly first. If your cable modem has static parameters
you can always enter those manually (such as
IP address, Gateway, and DNS servers). The settings
for the router may also need to be assigned manually.
Remember to use the routers IP address for your
gateway and assign yourself an IP address such as
192.168.0.2 or similiar. I hope this helps. I have used
Miami and Genesis on both types of hookups. Give
us some more details and I can hopefully give you
more help. Good luck.
C Snyder
