Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Install Seagate Barracuda 4 drive  (Read 2132 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Acill

Re: Install Seagate Barracuda 4 drive
« on: April 15, 2016, 09:43:54 PM »
Active terminator-----gvp scsi-----hard disk-------Active terminator
Logged
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline Acill

Re: Install Seagate Barracuda 4 drive
« Reply #1 on: April 18, 2016, 05:00:33 PM »
Quote from: magnetic;807294
OP
You may not need active termination at both ends if your board supports termination and your drive does. IIRC Seagate baraccuda 4gb has built in termination enabled by jumpers look up the manual online..


I just looked at one of my Barracuda drives and it does have a termination jumper.
Logged
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 
Pages: [1]   Go Up
« previous next »