Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Optimal hardrive speed in my A1200 / 030 RBM busboard  (Read 3502 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline zipper

Re: Optimal hardrive speed in my A1200 / 030 RBM busboard
« on: July 30, 2012, 10:26:17 AM »
Was 1230scsi.device set on synchron? Asynchron mode is clearly slower.
Logged
 

Offline zipper

Re: Optimal hardrive speed in my A1200 / 030 RBM busboard
« Reply #1 on: July 30, 2012, 07:00:40 PM »
Check the software you used to setup the drive - there should be an option to enable the synchron mode. As the max is 10 MB/s you should easily get 7...upto 9 MB/s. My Blizzard 2060 did about 8 MB/s.
Logged
 

Offline zipper

Re: Optimal hardrive speed in my A1200 / 030 RBM busboard
« Reply #2 on: July 30, 2012, 10:22:53 PM »
You could run unitcontrol from startup-sequence/user-startup (I never did, could set the synchron flag via other software or early startup of the accelerator).
Logged
 

Offline zipper

Re: Optimal hardrive speed in my A1200 / 030 RBM busboard
« Reply #3 on: July 31, 2012, 10:23:02 AM »
Oktagon gains a little from synchron,too. But stays well under 5 MB/s I think - never used a decent drive with it. 3.5 MB/s is the max for ZorroII.
Logged
 

Offline zipper

Re: Optimal hardrive speed in my A1200 / 030 RBM busboard
« Reply #4 on: July 31, 2012, 02:23:17 PM »
Sysinfo reads just raw speed, no file operations afaik.
Logged
 
Pages: [1]   Go Up
« previous next »