Blizzard 2060 in Amiga 2000 Problem

[jsixis]

*nods

I gave that a go on one occasion when I managed to get it going. It didn't say anything about any of the installed cards just which boot device to choose. Though and I'm not sure from memory was it WB3 Roms which tell you about the cards and WB2 Roms don't do this? (I have WB2.x roms in my A2000). That is on really old WB 1.x rom machines, no menu at all, WB 2.x it has a menu but lets you choose only the boot device and with WB 3.x it also does that but also lists cards? (Not sure, been a *long* time since I did anything really with Amiga hardware!).""


  Boot holding down both mouse buttons, when you get to the startup screen you have an option to view boards, click on that.

 If it says the board is working then that eliminates 1 problem. Re seating the chips is always a good thing.

 I'm assuming you have tried other slots the old school in me says the 060 takes the 1st slot and the scsi card next (even though they claim it makes no difference) and you installed the 060 software (pay attention where it installs to just in case you have to remove it)