Deneb 2.0 Working sort of

[platon42]

Tumbleweed wrote:
Hi all,

I've the Deneb installed and working sort of. On bootup I get a recoverable alert, which I can click through to boot into OS3.9.

Update Luciferin. See www.platon42.de

I can get my USB zip drive working on the internal USB port on the Deneb board, but when I move it to the external ports - the two connected by cable to the board, the drive disappears. I've also tried a USB flash drive and its the same thing, shows on the internal but not the external.

You probably connected the cable for the USB ports the wrong way round. This can easily kill the Deneb or the devices connected or both. The plain plastic faces down, the wireclips of the pins should be seen from above. The manual explains the right orientation.

[platon42]

Darrin wrote:

If I put the OS3.9 ROM in the Deneb, will I need to change my startup sequence to prevent OS3.9 trying to load the ROM again when it starts, or will it work out that the ROM is already loaded and skip it?

I thought that SetPatch would not attempt to reboot when it does not install updates due to all of them being there, but in the case this doesn't work, SetPatch NOROMUPDATE will do the trick.