After more than a year, I am able to solve the problem about the Keylock
This keylock is a piece of "poop" ! It can open itself at any time and PINs may fall into the Amiga. Replace it asap if you can. Otherwise, in the meantime, if you want to enjoy your AMIGA while the keylock is broken, here are the details below.
[size=+3]The schematic of the A3000T[/size]
[size=+3]The keylock: the front panel of the A3000T (front)[/size]
Click to enlarge the picture[size=+3]The keylock: the front panel of the A3000T (rear)[/size]
Click to enlarge the picture[size=+3]The keylock: cable from the motherboard[/size]
[size=+3]The keylock: 2 wires for Keylock On/Off and 2 wires for Reset[/size]
[size=+3]The keylock: connector details[/size]
((Blue wires connected to the motherboard on connector named CN302))
[size=+2]Connect the Red & Black wires (at the center) to enable AMIGA. Shorting the two wires (at right) each time you want to make a Reset.[/size]
