Amiga 3000, Deneb and the different Busters

[VingtTrois]

Hello,

I've installed the great DENEB on my AMIGA:
- A3000D 030@25Mhz + 2MB CHIP + 4MB FAST;
- KS3.1 / OS3.9 / HDD 100MB SCSI;
- USB multicard reader;
- DENEB (with lastest firmware);
- Buster 07 (and not 09);
- all others cards were removed !
- MUI 3.9 installed;

All perfect until the WB screen:
- my Compact Flash card appears as expected, but soon as I double-click on icon: my computer freeze, as the mouse.
I also have the crash of 'TRIDENT' when I try to run it (MUI is installed): with ou without the DENEB on ZORRO port.

When I move the Deneb jumper to Zorro-2 position: my USB LED multicard reader is OFF

Thank you for helping me.

[VingtTrois]

Also tested on my A3000(T) with BUSTER 11: I can't see the virtual drive "DenebInstall". Please how to reset my DENEB to install it as the begining ? Thx.

[VingtTrois]

The problem was half solved:
- works ONLY with DENEB jumper in RESCUE mode;
- with LUCIFERIN: I choose QUICK SETUP/POSEIDON USB";
- I change TOOLTYPES of TRIDENT software: "REGISTERMODE" + "SAVE";
- I create a false "TRIDENT.cfg" at "envarc:mui/";
- TRIDENT software crach anyway but I can use a part of it :crazy:
- I make a save: after this TRIDENT software crach definitivly and I must reboot :confused:
- after reboot I launch TRIDENT software and I make a RESTART: all USB device are recognized :biglaugh:
- after reboot: all USB devices are recognized at start

But I must stay in RESCUE mode!!!
Please, if I forgot something: HELP ME. Thank you

USB device recognized:
- USB Keyboard - T'nB - ACK-2080UM (100mA);
- Multicard reader "RYVAL" USB2 - ALL-in-1 Card Reader;
- USB TenKey Pad (with 2ports HUB): USB numerical pad => can't have correct caracters;
- ARCHOS Gmini 400 (HDD 20GB);
- HAMA (46945) 8-in-1 Card Reader;

[VingtTrois]

Hi!



I have similar problems. Did you try starting MuForce before Poseidon? It greatly improves stability in my A3000D.

Please have a look at:
http://aminet.net/package/util/libs/MMULib

I could not figure what goes wrong without MuForce, neverthless installing it fixed (most) crashes for me.

I'll try in few hours (the night was short for me: thank DENEB )...I read on other thread that it will be very nice if the CPU cache are OFF.
Thank you strim.