[SOLVED] Weird A600 PSU voltage!

[8bitbubsy]

So, I just measured my original A600 PSU's voltages...

On +5v I got +5.21v = [color=00ff00]GOOD[/color]
On +12v I got +11.92v = [color=00ff00]GOOD[/color]
On -12v I got -14.78v = [color=ff0000]BAD[/color]

-14.78v Is that acceptable or is it like "ARE YOU MAD"?  :cry:

BTW: I thought about using this PSU with an A1200 with 1GB CF and Microbotics M1230XA 030 50MHz 32MB RAM... I will *not* test it with the Amiga before someone says -14.78v is okay...  :cry:

[8bitbubsy]

I have an old A1200 mobo with destroyed CIA chips, I'll try to load the PSU with that one and measure from inside the Amiga. I'll tell back if it changed.

EDIT:
+5.09v
+11.85v
-12.31v! :-D

Thanks buddies  :cry:  :-)